Products

View our ISO 90001/2008 Certficate

Other Popular Resistance Thermometers - Pt100 Sensors

Basic Style RTD's (Type 61)

Available in Class B, A, 1/3, 1/5 or 1/10 DIN accuracies, these simple Pt100 assemblies comprise either a thin film or a ceramic wire wound element welded to insulated wires in a 4-wire configuration. Maximum operating temperature 480°F.

Enquiry Form

1. Element Style


2. No. of Elements and Ro Value


Number of Elements Select
Simplex (1 element)
Duplex (2 elements)
Triplex (3 elements)

Resistance value at 0ºC:

3. Tolerance of Element


  Tolerance of Element
(IEC 60751 for Pt100)
Select
Grade Accuracy
@ 0ºC
Accuracy
@ 100ºC
 
B ±0.30°C ±0.80°C
A ±0.15°C ±0.35°C
1/3 ±0.10°C ±0.27°C
1/5 ±0.06°C ±0.16°C
1/10 ±0.03°C ±0.08°C
Note: 130Ω elements are only
available in Grade B, Thin Film elements available in Grade A or B only.

4. Wiring Configuration


  Wiring Configuration
(IEC 60751:2008)
Select
2 2 wire
3 3 wire (most popular)
4 4 wire
4BL 4 wire blind loop

5. Wire Length


 ft*

6. Optional Plug Style


Abbildung Auswahl
CE7 - Miniature Plug Plastic, rated to 425°F (normal)
CE6 - Standard Plug Plastic, rated to 425°F (normal)

7. Quantity Required


Contact Details


Company Name


Your Name


Email


Telephone


Additional Information


If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below



Send Enquiry  


Ceramic elements are smaller and are available in better accuracies but are fragile, Thin Film elements are more rugged but are limited to class A and B accuracies
Note: Some wiring and number of element configurations may not be available in all diameters

Assemblies with pot seals are supplied with short tails as shown. However, where leads are several metres or more long, it is more suitable to have an overall sheathed Wire. We recommend the following Wires, which are 7/0.2mm and overall sheathed constructions. Other Wires are available, please contact us for details.