View our ISO 90001/2008 Certficate

Temperature Calibrators

Portable Dry Block and Bath Calibration System with Software

This patented compact portable calibration system has a unique combination of both dry block and oil bath in the same unit. This is possible by simply changing the insert. The unit is offered as standard with a dry block insert. The user can separately purchase the liquid insert that comes complete with a variable speed impeller. Using the Windows® CE operating system, the ¼ VGA full graphic display in the lid of the unit allows the user via the numeric keyboard to set the unit up for calibration. Alternatively the system can be programmed for automatic calibration of up to 20 points. The system incorporates a built in calibration sensor, however users may attach their own standard calibrated sensor. Sensors to be calibrated may be attached via the input ports for 2,3 or 4 wire Pt100, all popular thermocouple combinations as well as voltage or current inputs which makes it ideal for transmitter work. It can also be used as a reference source accepting inputs from measurement sensors. Results can be downloaded to a printer. The unit is ready for use in seconds and is ideal both for portable work as well as for bench work within the laboratory.
  • Temperature range: -40 (off ambient) to 150ºC
  • Resolution: 0.01ºC
  • Gradients at 95ºC w/water between bottom and 25mm from top: 0.06ºC
  • Stability (30 minutes after normal stabilisation)
    as a dry block: ±0.02ºC
    as a stirred liquid bath: ±0.005ºC
    as a stirred ice bath: ±0.001ºC
  • Uncertainty (with internal ref sensor): ±0.3ºC
  • Uncertainty (best): ±0.03ºC (depending on external reference used)
  • Inputs accepted: 2, 3 or 4 wire Pt100, thermocouples type K J E T S R B and N, 0 to 10V and 0 to 22mA
  • Well depth: 155mm
  • Well diameter: 50mm
  • Bath chamber dimensions: 261cm3
  • Thermostat test: Yes
  • Computer interface: RS232
  • Power supply: 110/230V AC
  • Dimensions: 406x254x356mm
  • Weight: 15.5 kgs (without inserts)

Enquiry Form

This calibrator is available to buy online. However, if you have a particular application that you require advice on or a question relating to this product, please use the form below to contact us. Alternatively please email us with your requirements or call one of our experienced engineers on 877 249 1777.

Contact Details

Company Name

Your Name



Application Details / Questions

Send Enquiry