Products

Rigid Stem RTD Sensor with Basic End Seal - Pt100 Sensors

Rigid Stem Resistance Thermometers - RTD, Pt100
with Basic End Seal

Related Products Thermowells
Related Products Compression Fittings
  • This style of sensor is ideal for rigid stem applications or where the sensor is shorter than 2". They are suitable for many applications and are rated to 482°F (250°C)
  • Custom built to your specification and terminated in a basic end seal rated to 275°F/135ºC
  • Alternatively, we have a large range of sensors available to buy online in various diameters and lengths
  • High accuracy, repeatability and reproducibility as simplex, duplex or triplex element assemblies
  • Wide operating temperature range of -103°F to +482°F (-75ºC to +250ºC)
  • Available in 2, 3 and 4 wire configurations, in grade B, A, 1/3, 1/5 or 1/10 accuracy
  • 316L Stainless Steel sheathed and manufactured to IEC 60751:2008

Rigid Stem RTD Enquiry Form

1. No. of Elements and Ro Value

Number of Elements Select
Simplex (1 element)
Duplex (2 elements)
Triplex (3 elements)

Resistance value at 0ºC:

2. Tolerance of Element

  Tolerance of Element
(IEC 60751 for Pt100)
Select
Grade Accuracy
@ 0ºC
Accuracy
@ 100ºC
 
B ±0.30°C ±0.80°C
A ±0.15°C ±0.35°C
1/3 ±0.10°C ±0.27°C
1/5 ±0.06°C ±0.16°C
1/10 ±0.03°C ±0.08°C
Note: 130Ω elements are only
available in Grade B
3. Wiring Configuration

  Wiring Configuration
(IEC 60751:2008)
Select
2 2 wire
3 3 wire (most popular)
4 4 wire
4BL 4 wire blind loop
4. Sheath Diameter
5. Sheath Length
 inches
6. End Seal Style

Illustration Select
CE1 Basic End Seal
(Suitable for most applications)
CE1A As CE1 but with additional PTFE heatshrink sleeve
(Suitable for most applications)
CE1WT Water Tight End Seal
(Particularly suited to applications where the entire sensor and lead are required to be submersible/ immersible in liquids. Must be supplied with Silicone Rubber extension lead)
7. Extension Leads

Illustration Select
PVC (rated to 220°F/105ºC)
PFA (rated to 480°F/250ºC)
Fiberglass with St./St. Overbraid (rated to 900°F/480ºC)
Silicone Rubber (rated to 200ºC usually used with CE1WT End Seal)
Please enter Wire length in feet

 ft
8. Optional Compression Fitting
9. Quantity Required

Contact Details

Company Name


Your Name


Email


Telephone


Additional Information

If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below



Send Enquiry  

BACK TO TOP
Products

Contact Us

About TC

FREE Guide

Privacy Policy

Terms and Conditions

Sitemap
FREE Wallchart Guide

Join over 500,000 engineers and buyers who have already received our FREE 74 page A3 Guide to Thermocouple and Resistance Thermometry

Company Name
  Address 1
Your Name
  Address 2
Title / Dept.
  State
Email
  ZIP Code
Telephone
  Country
Company Name
Your Name
Title / Dept.
Address 1
Address 2
State
ZIP Code
Country
Email
Telephone

We will only ever use the information you provide to occasionally contact you regarding our products and we will never disclose your details to a third party. Our privacy policy can be viewed here



I agree to the terms and conditions listed in the Privacy Policy

View our ISO 90001/2008 Certficate



© 2006- TC Measurement and Control Inc., PO Box 685, Hillside, IL 60162, United States
Tel.: 877 249 1777, Fax: 708 449 0777, Email: info@tc-inc.com







Note: Some wiring and number of element configurations may not be available in all diameters

Assemblies with pot seals are supplied with short tails as shown. However, where leads are several metres or more long, it is more suitable to have an overall sheathed Wire. We recommend the following Wire, which are 7/0.2mm and overall sheathed constructions. Other Wire is available, please contact us for details.