Products

Mineral Insulated Resistance Thermometers - Pt100 Sensors

with Basic End Seal
0.125" to 0.313" dia.
Internal basic end seal
with Pot Seal
0.062" to 0.313" dia.
A large selection of plain and threaded pot seals supplied with tails or extension Wire (PVC, FEP, Fiberglass etc.)
with Miniature Plug
0.062" to 0.313" dia.
Fitted with a miniature thermocouple plug rated to either 428°F or 660°F (220ºC or 350ºC)
with Standard Plug
0.062" to 0.313" dia.
Fitted with a standard thermocouple plug rated to either 428°F or 660°F (220ºC or 350ºC)
with Lemo Connector
0.062" to 0.313" dia.
Fitted with a size 1 Lemo plug
or jack
with Terminal Entry Gland
0.062" to 0.313" dia.
Terminated with a 16mm ISO x 1.5mm compression gland seal supplied with tails or extension Wire (PVC, FEP Fiberglass etc.)
with Micro die cast alloy head 0.125" to 0.250" dia. Micro die cast alloy screw down terminal head with ceramic terminal block. Suitable for simplex and duplex assemblies with Miniature IP67 die cast alloy head 0.125" to 0.313" dia.Weatherproof die cast alloy screw top terminal head with ceramic terminal block. Suitable for simplex and duplex assemblies with Standard IP67 die cast head 0.188" to 0.313" dia. Weatherproof die cast alloy screw top terminal head with ceramic terminal block. Suitable for simplex, duplex and triplex assemblies with IP67 heavy duty cast iron head 0.188" to 0.313" dia. Weatherproof cast iron screw top terminal head with ceramic terminal block. Suitable for simplex, duplex and triplex assemblieswith IP67 Bakelite head
0.188" to 0.313" dia.
Weatherproof Bakelite screw top terminal head with Bakelite terminal block. Suitable for simplex, duplex and triplex assemblies
with alloy straight through head 0.188" to 0.313" dia.Die cast alloy straight through terminal head with Bakelite terminal block. Suitable for simplex and duplex assemblies with 316 Stainless Steel head
0.188" to 0.313" dia.
Weatherproof 316 stainless steel screw top terminal head with ceramic terminal block. Suitable for simplex and duplex assemblies
with BUZ-H style top hat head
0.188" to 0.313" dia.
Weatherproof die cast alloy screw down 'flip' terminal head. Mainly used for duplex assemblies where up to two transmitters/blocks can be fitted
with spring loaded terminal block 0.125", 0.188", 0.250" and 0.313" dia.Spring loaded insert assemblies. The end seal is incorporated into a terminal block for mounting into any standard terminal head

BACK TO TOP
Products

Contact Us

About TC

FREE Guide

Privacy Policy

Terms and Conditions

Sitemap
FREE Wallchart Guide

Join over 500,000 engineers and buyers who have already received our FREE 74 page A3 Guide to Thermocouple and Resistance Thermometry

Company Name
  Address 1
Your Name
  Address 2
Title / Dept.
  State
Email
  ZIP Code
Telephone
  Country
Company Name
Your Name
Title / Dept.
Address 1
Address 2
State
ZIP Code
Country
Email
Telephone

We will only ever use the information you provide to occasionally contact you regarding our products and we will never disclose your details to a third party. Our privacy policy can be viewed here



I agree to the terms and conditions listed in the Privacy Policy

View our ISO 90001/2008 Certficate



© 2006- TC Measurement and Control Inc., PO Box 685, Hillside, IL 60162, United States
Tel.: 877 249 1777, Fax: 708 449 0777, Email: info@tc-inc.com