Products

Hugh Voltage Pressure and Vacuum Feedthroughs

Series EF - High voltage / current electrode

The integral electrode mounted in these feedthroughs enables specifiers to provide high-voltage, high-current supplies in process enclosures, autoclaves, vacuum furnaces and reactor vessels to power heaters, electric motors and other devices needing high power supply.

Feedthroughs are available with three sizes of copper electrodes rated 40A, 100A & 200A at 2kV maximum. Stainless steel conductors, that have a lower current rating than copper electrodes, can be specified instead of copper. These are often used when temperatures exceed 380ºC. Nickel conductors may also be specified to special order.

Feedthroughs with copper electrodes have brass nuts and washers. Stainless steel nuts and washers are fitted to stainless steel and nickel electrodes.

Series EF sealed electrode assemblies are supplied pre-torqued for immediate installation. Integral insulators are Alumina.
  • Copper or Stainless steel electrodes
  • Three sizes of feedthrough assembly
  • Rated for use at 2KV at up to 200A
  • Pressure range: Vacuum to 8,500 psi *
  • Temperature range:
    <-Cu electrode: -328°F to +720°F *
    <-SS electrode: -328°F to +1,600°F *
  • 316L Body (and seat where applicable). Follower and cap in 303 or 304; Alumina insulators
  • Choice of 3 sealant materials
  • Maintainable - sealants replaceable
  • Electrodes pre-installed in feedthrough and torqued ready for installation
  • A large range of feedthroughs is available to buy online

    * Dependent on sealant selected

Body Size, Pressure Guide and available Bore Sizes for NPT Threads2

Body Size Size 2 (1/4") Size 3 (1/2") Size 4 (3/4")
Sealant L T V L T V L T V
Voltage Rating 2Kv 2Kv 2Kv
Electrode Material Electrode Current Rating Electrode dia. (inches) The table indicates the available electrode sizes for each feedthrough body size.
The maximum guide pressure value (in psi) at 68°F (20°C)is shown for each sealant material according to element size1.
These ratings are a guide and the suitability of any of the products described herein for a particular application is entirely at the discretion of the purchaser as being the best judge for that particular application.
Copper
316 Stainless Steel
Nickel
40A
10A
15A
0.125" 8700 5000 7900    
Copper
316 Stainless Steel
Nickel
100A
15A
40A
0.250"   6500 2100 5800
Copper
316 Stainless Steel
Nickel
200A
30A
80A
0.500"   2900 2100 2100
  1. The guide pressures shown for each type of sealant are at 68°F (20°C). Spectite® feedthroughs from TC Inc. have been designed to provide an efficient seal on the elements and restrain them from moving under pressure and vacuum. It is good installation practice to provide additional, mechanical restraint to the elements when differential pressure exceeds 50% of the feedthrough guide pressure value at 68°F (20°C). With an increase in temperature, a reduction in the maximum guide pressure value can be expected. These ratings are a guide and the suitability of any of the products described herein for a particular application is entirely at the discretion of the purchaser as being the best judge for that particular application.
  2. Other types of process connection are available, see Feedthrough Sizes.

Pressure and Vacuum Feedthrough Enquiry Form

1. Thread Size Required
  see table
2. Electrode
 see table
3. Sealant Type

4. Quantity Required

Contact Details

Company Name


Your Name


Email


Telephone


Additional Information

If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below



Send Enquiry  

BACK TO TOP
Products

Contact Us

About TC

FREE Guide

Privacy Policy

Terms and Conditions

Sitemap
FREE Wallchart Guide

Join over 500,000 engineers and buyers who have already received our FREE 74 page A3 Guide to Thermocouple and Resistance Thermometry

Company Name
  Address 1
Your Name
  Address 2
Title / Dept.
  State
Email
  ZIP Code
Telephone
  Country
Company Name
Your Name
Title / Dept.
Address 1
Address 2
State
ZIP Code
Country
Email
Telephone

We will only ever use the information you provide to occasionally contact you regarding our products and we will never disclose your details to a third party. Our privacy policy can be viewed here



I agree to the terms and conditions listed in the Privacy Policy

View our ISO 90001/2008 Certficate



© 2006- TC Measurement and Control Inc., PO Box 685, Hillside, IL 60162, United States
Tel.: 877 249 1777, Fax: 708 449 0777, Email: info@tc-inc.com