Mineral Insulated Resistance Thermometers - Pt100 Sensors
with Basic End Seal0.125" to 0.313" dia.
Internal basic end seal
with Pot Seal0.062" to 0.313" dia.
A large selection of plain and threaded pot seals supplied with tails or extension Wire (PVC, FEP, Fiberglass etc.)
with Miniature Plug0.062" to 0.313" dia.
Fitted with a miniature thermocouple plug rated to either 428°F or 660°F (220ºC or 350ºC)
with Standard Plug0.062" to 0.313" dia.
Fitted with a standard thermocouple plug rated to either 428°F or 660°F (220ºC or 350ºC)
with Lemo Connector0.062" to 0.313" dia.
Fitted with a size 1 Lemo plugor jack with Terminal Entry Gland
0.062" to 0.313" dia.
Terminated with a 16mm ISO x 1.5mm compression gland seal supplied with tails or extension Wire (PVC, FEP Fiberglass etc.)
with Micro die cast alloy head 0.125" to 0.250" dia.
Micro die cast alloy screw down terminal head with ceramic terminal block. Suitable for simplex and duplex assemblies
with Miniature IP67 die cast alloy head 0.125" to 0.313" dia.
Weatherproof die cast alloy screw top terminal head with ceramic terminal block. Suitable for simplex and duplex assemblies
with Standard IP67 die cast head 0.188" to 0.313" dia.
Weatherproof die cast alloy screw top terminal head with ceramic terminal block. Suitable for simplex, duplex and triplex assemblies
with IP67 heavy duty cast iron head 0.188" to 0.313" dia.
Weatherproof cast iron screw top terminal head with ceramic terminal block. Suitable for simplex, duplex and triplex assemblieswith IP67 Bakelite head0.188" to 0.313" dia.
Weatherproof Bakelite screw top terminal head with Bakelite terminal block. Suitable for simplex, duplex and triplex assemblies
with alloy straight through head 0.188" to 0.313" dia.
Die cast alloy straight through terminal head with Bakelite terminal block. Suitable for simplex and duplex assemblies
with 316 Stainless Steel head 0.188" to 0.313" dia.
Weatherproof 316 stainless steel screw top terminal head with ceramic terminal block. Suitable for simplex and duplex assemblies
with BUZ-H style top hat head0.188" to 0.313" dia.
Weatherproof die cast alloy screw down 'flip' terminal head. Mainly used for duplex assemblies where up to two transmitters/blocks can be fitted
with spring loaded terminal block 0.125", 0.188", 0.250" and 0.313" dia.
Spring loaded insert assemblies. The end seal is incorporated into a terminal block for mounting into any standard terminal head
